- Merit 10 : The position and width of the joint is calculated so that film loss can be minimized.
- Whenever there's a joint in the film there's a major film loss. Losses like that are no joke.
- The position and width of the joint is calculated and tracked with NC precision (about 0.01 mm) by the same software that constantly controls the position of the servo motors, minimizing the loss.
- The main film roll, operating side lower film roll, non-operating side lower film roll, etc. are each separate systems and in each case, up to 16 joints can be detected at one time!
- Merit 11 : Various safety features
- What are you doing about safety? I don't like a machine that can hurt me, no matter how good it is!
Safety features
- The cutter is lighter and the blade is fitted with a limiter
so that the cutting power can not exceed that of the air cylinder. - Surplus power is suppressed by reducing the deceleration of the reduced capacity
unwinding motors and servo motors. - The machine will not start for a certain period after the alarm buzzer
has sounded in operating mode. ...Etc.
- The cutter is lighter and the blade is fitted with a limiter
- Merit 12 : General parts are warranted for three years.
- What is the warranty period for components?
Sealing bars, punch blades, rubber rollers, etc. Except for some consumable items,
general parts are warranted for three years.
And even more!We continue providing parts and services as long as your machine is running unlike common manufacturers. For instance, if our vendor had quit providing a certain model, we would find alternatives in order to keep your machines running.
- The normal three year warranty period will apply to our products
which are adjusted or repaired on-site by our engineers. - Some restrictions may apply
- The normal three year warranty period will apply to our products
