Products

BH-80DHigh-speed, three-side-seal, automatic pouch making machine

BH-80D

This model can make three-side-seal pouches
larger than the BH-60D series model.

3servo system

Maximum pouch making shot: 240 CPM

  • *Pouch making capacity depends on film material and thickness.

Film roll versatility

  • A three side seal machine available with one roll film half-cut equipment and two roll film seaming equipment.
  • Standing pouch units and zipper seal units available as additional options.
  • Other options available, including an additional film feed roller servo drive.

Product Features

This model can make three-side-seal pouches larger than the BH-60D series model. Additional options, including standing pouch unit, zipper seal unit or in-line Thompson die-cut unit, make this model very versatile to meet the needs of pouch making.

Totani's original servo motor control system realizes both high speeds, up to 240 CPM and high quality (beautiful and high-strength sealing). And, film feed roller unit that operates with servo drive system can be added. This model supports both half fold system and joining film system. The Half fold system uses one roll film while the Joining film system uses two roll films to make large-sized pouches at high speed.

Most laminated films used in pouches for food, commodities, and infusion bags for medicines are supported.

* Pouch making capacity varies depending on film material and thickness.

The maximum cycle per minute described is verified under the certain conditions.
Actual production speed may vary depending upon materials and others. Please consult with sales dept. for further information.

Pouch Making Sizes and Shapes

  • BH-80D

    [Half Hold] Bottom Seal
    (4-line bottom seal case illustrated)

    L1 (Pouch length) :2-strike 60 mm to 300 mm
     1-strike 500 mm max.
    W1 (Pouch width) :75 mm to 800 mm
    S1 (Seal width) :80 mm max.
    S2 (Seal width) :25 mm max.

    *Longitudinal heat sealer length controls maximum feed length. Longitudinal seal is 1-strike if feed length is 300 mm or more. An optional double feed unit should be used if 2-strike is required.

    *Slitting line shown thus ---------

  • BH-80D

    [Half Hold] Side Seal
    (4-row side seal case illustrated)

    L2 (Pouch length) :60 mm to 800 mm
    W2 (Pouch width) :2-strike 300 mm max.
     1-strike 500 mm max.
    S3 (Seal width) :25 mm max.
    S4 (Seal width) :40 mm max.

    **Maximum pouch length is controlled by equipment fitted to cross heat sealer unit and effective length of cross heat sealer unit. Therefore, the maximum pouch widths shown above are not the pouch making capacity with full equipment.

*Bag sizes referenced above utilize optional devices.

BH-80D : Standard Specifications & Optional equipment
Find the optimum pouch making machine for your business.
TOP